How to set up celestron telescope

how to set up celestron telescope

How To Set Up a Telescope with an Equatorial Mount [Guide]

Mar 01,  · We finally got around to setting up the Celestron StarSense Explore LT. It's one of the most family friendly telescopes. It's great for beginner astronomers. Take control of your telescope! Download the Celestron PWI Telescope Control Software. SkyPortal App. Celestron’s FREE planetarium app is an astronomy suite that redefines how you experience the night sky. Using Telescope Eyepieces. Your eyepieces are the first accessories you should learn to use with your telescope. Read our guide!

This guide is intended to help first time users and those who are experiencing difficulty with the Celestron SkyPortal previously known as Celestron SkyQLink Wifi module. Now, this blog will go through the ins and outs of how to use the Celestron SkyPortal app that is used to control the Celestron telescope and any telescope using the Celestron SkyPortal WiFi adapter.

These telescopes are just examples of some that are compatible with the Celestron SkyPortal Module:. This is the type that moves left-right and up-down. The alternative to the alt-az is the equatorial mount. This tricky procedure is called polar alignment.

When you ask for the Jewel Box, Jupiter, or NGCthe mount looks up a database, does some calculations, and determines where to point.

The benefit of the Celestron NexStar Evolution over the NexStar SE, and any non wi-fi enabled mount for that matter, is its ease of use thanks to its intuitive interface and convenience. But it requires some information to get it going, such as the time, time zone, date, longitude, latitude, altitude, and spatial coordinates.

The NexStar Evolution, which is wifi-enabled AND computerised, can extract that valuable information on its own, further reducing the amount of input you need to provide. The time, time zone, longitude and latitude is information that is readily available either using the Compass app on your phone, by using an actual physical compass, or by simply Googling your location. But spatial co-ordinates? Funnily enough, this was one of many problems the astronauts on Apollo 13 had to solve.

The Apollo 13 astronauts were able to peek out of their capsule and see the Moon. This gave them just enough information to be able to get home. After you point the scope at a second bright star, the mount will know roughly where everything is. This is called a two-star alignment. Pointing to a third star will really nail it. But in the case of star alignment of computerised alt-az mounts such as the NexStar range, I think Celestron has the edge.

For the alignment procedure, pop your longest eyepiece into the telescope I used a 40mm so you are on the lowest magnification. Connect to this you may have to disconnect from your home WiFi network first.

The mount will get time, date and location information from your phone and immediately start the star alignment procedure. Stop for a second and look up. Choose three of the brightest stars. The arrows on the left and right of the app screen are the slew buttons. It will then move to the second phase. The app will tell you to look through the eyepiece.

Use the slew buttons to make sure the star is right in the very centre of the round field you can see. Once the star is right in the middle, press enter on the app screen. Now, the procedure is exactly the same as the first one. Use your finderscope to slew quickly to the star, hit enter, and then use your eyepiece to centre it in the field and hit enter.

Once you have finished the star alignment, you can use the app to do what you want. How to write an email to a job recruiter includes touching a target on the app screen and going there, selecting a target from a find list, or taking a tour.

How to set up an equatorial mount. Common disasters in selecting telescope mounts. Come in for advice on how to get the best out of your current telescope, what your next telescope should be, how to take photos of the sky, or even how to see some rare birds. Would you recommend this scope and what upgrades i. Please advise. Hi Hal, the Evolution EdgeHD 8 is a great scope, which is especially designed for astrophotography, as it has an in-built field flattener.

As to eyepieces, the scope comes with a 40mm and a 13mm eyepiece. The 40mm is a lovely lens, and has a very wide field that is, low magnification. The 13mm eyepiece has more magnification, but I think a little more would be appropriate for looking at planets. I think something like an 8mm or thereabouts would suit the telescope, but not much more or the image will start to become poor.

Your email address will not be published. Save my name, email, and website in this browser for the next time I comment. Skip to content. How to describe a beach Our Store Search for:. It also needs a bit of a set up procedure. Setup guide The benefit of the Celestron NexStar Evolution over the NexStar SE, and any non wi-fi enabled mount for that matter, is its ease of use thanks to its intuitive interface and convenience.

Star alignment The Apollo 13 astronauts were able to peek out of their capsule and see the Moon. Celestron SkyPortal vs. This is in two phases. The second and third stars Now, the procedure is exactly the same as the first one.

Enjoy your observing! Leave a Reply Cancel reply Your email address will not be published. Next Post: How to polar align a computerised equatorial mount in the Southern Hemisphere without a polar scope.

The Celestron NexStar Series

Once you have connected your phone to the mount’s WiFi, open the Celestron SkyPortal app. It’ll look like this if you hold your phone sideways (in “landscape”). Touch “connect and align”. The mount will get time, date and location information from your phone and . Essentially you just want to get your object lined up dead-center in your Finderscope, and also dead-center in your eyepiece. Once they are both lined up then it is set up and aligned properly. To help get the Finderscope centered in your eyepiece, you can loosen or tighten the screws that are holding the Finderscope in victorsfc.comted Reading Time: 9 mins. Celestron advanced series telescope instruction manual gt c80ed-r, ced-r (67 pages) Telescope Celestron CGE Instruction Manual. Cge series (75 pages) Telescope Celestron CGE Instruction Manual. Schmidt-cassegrain optical tube assembly (12 pages) Sign up! Restore password. .

Have you recently purchased a new telescope with an Equatorial Mount, or are you looking to buy one? If so, you are going to need to know how to set it up. This article will introduce you to the Equatorial Mount and provide you with some of the best tips when it comes to setting it up correctly.

The Equatorial Mount is designed, once polar aligned, set up, and locked onto a target to follow your target across the sky.

This makes it excellent for stargazing and viewing the various objects in space and the wider universe! I knew it would be difficult to start with, and it is always quite fun learning how to use something for the first time. But I wish there was a guide that I could have followed before I had got started as this would have helped me and got me up and running quicker. It will take some skill and time. Unfortunately, you are not going to be able to just run outside, set it up and aim to see the impressive night sky and all its glory.

Once you can accept this, you can start to have a lot of fun with it. Try to enjoy the learning experience because it will make it a lot easier!

The first time I ever used my Equatorial Mount, I never thought to align the Finderscope and it was just frustrating. So, do not do this with a star because they are moving through the sky. When finding an object to focus on, make sure it is about a half a mile or more away. Essentially you just want to get your object lined up dead-center in your Finderscope, and also dead-center in your eyepiece. To help get the Finderscope centered in your eyepiece, you can loosen or tighten the screws that are holding the Finderscope in place.

This way it can aim in different directions. This is not particularly easy to do and it does take a little time. The next step is to ensure that your tripod is level. The first thing is to take your telescope and mount to a position in where you want to set up for viewing. First take your telescope from the mount You can loosen the bottom bolt and this enables you to lift it off. Using a good old spirit level is the next thing to do. You need to loosen the clutches so that the telescope can move freely, and you remain polar aligned.

Now the only way that you will move the telescope is on the two axes. You do not want to move the tripod around to aim it where you want to view.

Use a counterweight to balance the tripod and lock the declination so it only moves in one direction. Essentially no matter where you. Now if you were to put it in a spot and started twisting in one direction, it would move the weight up and down the shaft to balance. If you let go you may notice that that the tube wants to drop. If so, you need to bring the weight down. Keep adjusting until you have leveled the right ascension axis. Next, you need to twist on a 90 degree angle to balance the declination axis.

If it is rolling one way or another you should loosen. As mentioned at the start of this guide, the Equatorial Mount is designed, once polar aligned, set up, and locked onto a target to follow your target across the sky. By turning this slowly you will automatically track the star in the proper orientation.

So if you look at your dial you can see the longitude that is set. You are going to want to search for your location longitude to obtain the degrees of that location. From there you need to adjust the dial to get lined up with the star you want to see. Once your telescope lines up, if you look down your Finderscope you should notice that the star you are trying to see is directly in the cross-hairs. With polar alignment, you need to remain locked.

Now you can finally use the telescope. Begin by loosing your declination clutch and right ascension to move. Now you only have two axes, so it can be quite difficult but theoretically you should be able to aim your scope wherever you want. You want to make sure it is easy to look through the eyepiece so if required, loosen the two clamps and rotate your entire tube to get things where they need to be.

Just remember that this could cause the scope to get a little out of balance, which you will need to re-balance. This is going to track the motion of the object through the sky and once you get to this stage its pretty cool. If you are really struggling, you can follow this video on YouTube which is helpful for seeing this in action.

By following this guide you will be able to go out and start tracking objects in the sky a lot quicker. Just so you know, I may collect a share of sales or other compensation from the links on this page - at no additional cost to you. This includes Amazon.

4 thoughts on“How to set up celestron telescope

Add a comment

Your email will not be published. Required fields are marked*